← Back to the GS2602 Ground Stump Root Harvest Archive
View full-resolution images:
Wood Cookie Slab for Resin – Hook Form (GS2602003)
GS2602003 is a diagonal C-shaped cross-section with a distinct hook profile, narrowing at one point into a thin structural bridge that forms a natural bottleneck through the piece — handle this one with care, it’s logged fragile rather than stable. No structural cracks have been found despite the bridge, though bark is naturally attached and loose in places. Light tool marks from milling remain visible on the surface. Recovered from Edenvale, Gauteng, 3 February 2026. Field seasoned, MC confirmed at 10–12% on a pin meter reading taken on a sanded surface, 1 March 2026. One piece. Exact item shown.
Specimen Characteristics — GS2602003
This specimen (GS2602003) represents a diagonally cut root section from the GS2602 harvest, forming a hooked geometry with a narrowed structural connection between two masses. Grain flow follows this curvature, creating directional movement and concentrating stress at the bridge section.
Visual Character
- Irregular hook-shaped cross section with directional movement
- Radial grain pattern flowing around a narrow bridge section
- Live-edge bark retained, partially loose at one end
- Contrast between sapwood and heartwood zones
- Thin structural bottleneck forming a natural resin channel
These are natural characteristics of the wood, not defects.
Physical Specifications
Length: 335 mm
Width: 140 mm
Thickness: 40 mm
Weight: 720 g
Moisture Content: 10–12%
Condition Report
Flat: Yes
Twist: None
Bow: None
Natural Hairline Cracks: None
Structural Cracks: None
End Splits: None
Bark: Present (partially loose)
Sapwood: Present
Surface Preparation: Sanded to 100 grit
Condition: Fragile
This specimen is structurally delicate due to a thin bridge section and may break during handling or machining if unsupported. Stabilisation is required before use.
Suggested Uses
- Resin casting and void fill applications
- Decorative wall-mounted pieces
- Small epoxy table inserts (stabilised)
- Sculptural or artistic woodworking
The natural geometry makes this piece ideal for transparent resin work where internal structure becomes part of the design.
Explore more material options in our wood specimens collection.
Stabilisation is required before use.
Not recommended for structural applications.
Working With Root-Derived Timber
Root-derived timber develops under structural stress, producing irregular grain flow and internal variation. In cross-section cuts, these characteristics appear as radial grain movement and localised structural features.
Fragile zones such as thin bridges should be stabilised before machining or resin work.
For technical reference on wood properties, see The Wood Database.
Timber Origin
Urban salvaged timber from Edenvale, Gauteng, South Africa.
Recovered from a ground stump root system and milled locally as part of the GS2602 harvest.
Natural Material Notice
Wood is a natural material and may contain variation in grain, colour, and structure.
All photographs show the exact item being sold.
Provenance Certificate
Specimen ID: GS2602003
Harvest: GS2602
Origin: Edenvale, Gauteng – South Africa
Species: Undetermined (Root-Derived Timber)
Cut Type: Transverse cross-section (Root)
This specimen is part of the documented BurlBlade archive system.
View in Specimen Registry
View Harvest Archive
One-off natural specimen.
This piece cannot be restocked once sold.
Related Specimens from GS2602
GS2602004 – U-shaped slice
GS2602007 – Hollow arc
GS2602001 – Root slab
